Keywords : Aluminium plate | Aluminum foil strip
Send Inquiry x
I can help you
Send
PRODUCTS
PRODUCT CENTER
SERVICE PHONE
86 17344894490
banner
Location : Home/Aluminium Profile/ Aluminium Mold Block

Aluminium Mold Block

Last Updated :2023/07/03

Aluminium Mold block
Aluminum Mould Block Supplier


   Signialuminium specilizes in procesing Aluminium Mold block, we have the slitter line, slab cutting line, shear line. The equipments include sheet shear machine, plate sawing and cutting machine, tube and bar sawing machine and so on. We can slit, cut across, longitudinal cutting, sawing, shearing and coated with plastic. We can offer the exactest Aluminium Mold block which is the most economical and reasonable.


 
  Aluminium Mold block, offered by us, are manufactured using high quality Aluminum,are made available in different dimensions as per the requirement of the clients. Owing to their  excellent processing performance, good corrosion resistance, high toughness and deformation after processing, easy coating, good oxidation effect and other excellent features,etc,the Aluminium Mold block can be used in injection moulding, RIM, structural foam moulding, vacuum forming, blow moulding and rubber moulding,etc.


 
General Specification

Alloy Temper Specification (mm)
Thickness Width Length
5052,5083,5086,6061,2024,7075 H111, H112, H116,T4, T6, T651 6~300mm 100~2600 500~16000
Remark: special specifications can be produced accordingly to your requirement.
 
Chemical Composition

Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Others Alu min
each Total
5052 0.25 0.40 0.10 0.10 2.2~2.8 0.15~0.35 - 0.1 - 0.05 0.15  
5083 0.40 0.40 0.10 0.4~1.0 4.0~4.9 0.05~0.25 - 0.25 0.15 0.05 0.15 remainder
5086 0.40 0.50 0.10 0.20~0.7 3.5~4.5 0.05~0.25 - 0.25 0.15 0.05 0.15 remainder
6061 0.4~0.8 0.7 0.15~0.40 0.15 0.8~1.2 0.04~0.35 - 0.25 0.15 0.05 0.15 remainder
2024 0.50 0.50 3.8~4.9 0.3~0.9 1.2~1.8 0.1 - 0.25 0.15 0.05 0.15 remainder
7075 0.40 0.50 1.2 ~2.0 0.30 2.1~2.9 0.18~0.28 - 5.1~6.1 0.20 0.05 0.15 remainder
 
Physical property

Alloy Temper Specified
Thickness
mm
Tensile
strength
Rm MPa
Yield strength
Rp 0.2 MPa
Elongation
min.
Bend
Radius
Hardness
over Up to Min. Max. Min. Max. A50mm A 180° 90° HBW
5052 O/H111 6 12.5 165 215 65 - 19 - - 2.0t 46
12.5 80.0 165 215 65 - - 18 - - 46
H112 6 12.5 190 - 80 - 7 - - - 55
12.5 40.0 170 - 70 - - 10 - - 47
40.0 80.0 170 - 70 - - 14 - - 47
5083 0/H111 6.3 12.5 270 345 115 - 16 - - - 75
12.5 50.0 270 345 115 - - 15 - - 75
50.0 80.0 270 345 115 - - 14 - - 73
80.0 120.0 260 - 110 - - 12 - - 70
120.0 200.0 255 - 105 - - 12 - - 69
H112 6.0 12.5 275 - 125 - 12 - - - 75
12.5 40.0 275 - 125 - - 10 - - 75
40.0 80.0 270 - 115 - - 10 - - 73
80.0 120.0 260 - 110 - - 10 - - 73
H116 6.0 12.5 305 - 215 - 12 - - 4.0t 89
12.5 40.0 305 - 215 - - 10 - - 89
40.0 80.0 285 - 200 - - 10 - - 83
5086 0/H111 6.3 12.5 240 310 100 - 17 - - 2.5t 65
12.5 150.0 240 310 100 - - 16 - - 65
H112 6.0 12.5 250 - 105 - 8 - - - 69
12.5 40.0 240 - 105 - - 9 - - 65
40.0 80.0 240 - 100 - - 12 - - 65
H116 6.0 12.5 275 - 195 - 10 - - 3.5t 81
12.5 50.0 275 - 195 - - 9 - - 81
2024 O 6.0 9.0 - 220 - 140 13 - - 2.5t 55
9.0 12.5 - 220 - 140 13 - - 4.0t 55
12.5 25.0 - 220 - - - 11 - - 55
T3/T351 6.0 12.5 440 - 290 - 13 - - - 124
12.5 40.0 430 - 290 - - 11 - - 122
40.0 80.0 420 - 290 - - 8 - - 120
80.0 100.0 400 - 285 - - 7 - - 115
100.0 120.0 380 - 270 - - 5 - - 110
120.0 150.0 360 - 250 - - 5 - - 104
7075 O 6.0 12.5 - 275 - 145 10 - - 4.0t