- Transformer Aluminium Strip
- Color Coated Aluminium Strip
- Aluminium Jacketing Insulation Coil
- PCB Entry Aluminium Board Strip
- Aluminum Plastic Composite Strip
- Aluminium Slit Strip
- Window Shutter Aluminium Strip
- Aluminium Corner Strip
- Aluminium Air Duct Strip
- Car License Aluminium Strip
- Heat Exchange Aluminium Strip
NEWS
INFORMATIONTel:
86 173448944902024 T3511 Aluminum Sheet Plate
Last Updated ：2023/07/03
2024 T3511 Aluminum Sheet Plate
2024 T3511 Aluminum Sheet Plate Parameter
2024 T3511 Aluminum Sheet Plate Chemical Composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Al | |
|
2024 (2A12) |
Min | 3.8 | 0.3 | 1.2 | Reminder | ||||||
| Max | 0.5 | 0.5 | 4.9 | 0.9 | 1.8 | 0.10 | 0.25 | 0.15 | 0.2Zr Ti | ||
2024 T3511 Aluminum Sheet Plate Specification and Tolerance
|
2024 (2A12) |
A | Tolerance (mm) | |||||||||
| Min | Max | Typical value | Thickness | 10-15 | >15-35 | >35-50 | >50-60 | >60 | |||
| Thickness | 10 | 60 | * | Thickness tolerance | 0, 1.0 | 0, 1.4 | 0, 1.6 | 0, 1.8 | 0, 2.0 | ||
| Width | 280 | 505 | 500 | Width tolerance | 0, 3.5 | ||||||
| Length | 1000 | 6000 | 3000 | Length tolerance | 0, 15 | ||||||
|
(thickness range) 10mm-60mm (include) 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm |
Plane clearance | 2.0 | 2.0 | 1.5 | 1.5 | 1.0 | |||||
2024 T3511 Aluminum Sheet Plate Basic properties
| Alloy | Temper | Yield Strength | Tensile Strength | Elongation A50mm(%) | Hardness(HB) | ||||
| Min. | Max. | Min. | Max. | Min. | Typical value | ||||
|
2024 (2A12) |
O | - | 150 | - | 250 | 10 | 47 | ||
| T3511 | 310 | - | 450 | - | 6 | 120 | |||
| T8511 | 380 | - | 455 | - | 4 | 130 | |||
